MAGFORMS LCD & DLP ELASTIC600 3D PHOTOPOLYMER RESIN WHITE
Flexible and Elastic: Ideal materials to replace silicone, polyurethane and rubber for packing and moulding.
Good flexibility: The flexibility of Elastic600 is similar to the rubber or TPU. Building parts with low hardness and perfect toughness.
Resistance to tear: RC800 is easy to clean thoroughly with no residual resin after post-curing.So it can fasten the cleaning process of the products. Marvellous tear resistance so that the parts will not break even be squeezed, twisted or bent many times.
Wide compatibility: This resin is compatible with most 405nm wavelength stereolithography DLP/LCD 3D printers.
Elastic600
Flexible and Elastic
Ideal materials to replace silicone, polyurethane and rubber for packing and molding.
Good flexibility
The flexibility of Elastic600 is similar to the rubber or TPU.
Good flexibility
The flexibility of Elastic600 is similar to the rubber or TPU.
Resistance to tear
The Elastic600 printing parts will be with outstanding tear resistance and difficult to break after bending or pressing repeatly.
Wide compatibility
This resin is compatible with most of DLP/LCD 3D printers.
Wide compatibility
This resin is compatible with most of DLP/LCD 3D printers.
| Appearance | Black/White |
| Viscosity @30℃(Liquid) | 749 |
| Density @25℃(Liquid) | 1.08 |
| Tensile Strength | 1.7 |
| Tensile Modulus | 1.3 |
| Elongation at Break | 132 |
| Flexural Strength | / |
| Flexural Modulus | / |
| Izod Impact(Notched) | / |
| Hardness(Shore D) | 65A |
| HDT@0.46 MPa | / |
| Water Absorption | 0.65 |
Comments (0)
No customer reviews for the moment.
Flexible and Elastic: Ideal materials to replace silicone, polyurethane and rubber for packing and moulding.
Good flexibility: The flexibility of Elastic600 is similar to the rubber or TPU. Building parts with low hardness and perfect toughness.
Resistance to tear: RC800 is easy to clean thoroughly with no residual resin after post-curing.So it can fasten the cleaning process of the products. Marvellous tear resistance so that the parts will not break even be squeezed, twisted or bent many times.
Wide compatibility: This resin is compatible with most 405nm wavelength stereolithography DLP/LCD 3D printers.