Cubicon - MAX600 Industrial SLA 3D Printer
Print with expert precision with the Cubicon Max600 large-scale industrial SLA 3D printer, featuring extra large printing volume, extensive material compatibility, and adjustable laser spot size.
The Cubicon Max600 SLA 3D printer is the ideal industrial printer for large projects, small batch production, and full-scale prototyping with professional results. This 3D printer features an autocollimator system, adjusting the alignment between the recoater and the resin surface to within 0.01 degrees. With extensive material adaptability, the Max600 is compatible within a wide range of professional applications.
Applications
Planning
Compare and analyze several draft designs based on their actual sizes and materials.
Check problems of existing products based on their actual sizes and materials, and to reflect in planning.
Finalize the plan by verifying the ideal size for customers in actual size.
Design
Check the product assembly process and completeness of complex mechanisms in advance and to reflect the results in the design.
Make a final check on screws and holes in the correct position.
Test and Evaluation
Check in advance places where foreign substances reside in a pipe.
Check the actual heating value of a instead of simple calculation.
Analyze to verify any problem with oil flow depending on the temperature range.
Mold Checking
Adjust the position and number of ejector pins in consideration of the design.
Optimize the size of the stepped pulley.
Optimize the gate position for weld-free molds.
Production Preparation
Pre-test and prepare production lines before the final prototype is released.
Easily identify products with free-form surfaces.
Fabrication
Support small quantity batch production.
Support immediate fabrication only based on design without costly mold.
Replacements and Accessories after Mass Production
Make replacement in case of a problem in part of the production equipment.
Immediately produce and utilize any necessary accessories for efficient mass production.
Tilting Calibration Function
The proprietary Auto-Collimator measurement system (HVO-AC50L) for MAX600 has a high resolution of 0.001268 deg.
Use the system to adjust the alignment between the recoater and the resin surface to within 0.01 deg.
It also monitors tilt real time, precisely aligning the printer in the direction of gravity.
Shape less than 0.5mm
Precisely as designed
It has a high performance laser built in to accurately print the appearance of the printed output. Shapes less than 0.5mm are output correctly without any distortion.
That is, MAX600 can print even the most delicate workpieces without problems.
High-Precision Recoater Auto Leveling System
MAX600 is equipped with its unique ‘High-Precision Recoater Auto Leveling’ system based on a precision vacuum sensor and a laser displacement sensor.
By applying the method of coating the resin surface uniformly for the next layer output after one layer output, it maintains the optimum output quality through precise control of the layer thickness
With the desired material
MAX600 supports all kinds of materials we know.
You can print the material/texture right from your head
Rigid and Solid Material
ABS Like: Good color formation in injection, the most widely used
Tough: Extremely strong
Polypropylene Like: Lightweight, advantageous to moldability
Tooling Board Like: High density, possible to make cutting tools
Accurate: Very precise representation
Transparent Material
High Transparency: Excellent transparency
Polycarbonate Like: Not only transparent and light, but also resistant to impact and rupture
Flexible and Elastic Material
Rubber-like: Flexible like rubber
Soft: Excellent elasticity
Suitable Material for Special Environment
Dental: Used for dental parts
Heat-tolerant: Excellent heat-resisting property
Ceramic: High thermal and electrical conductivity
Damp-Proof: Advantageous in a high-humidity environment
Variable Laser Spot Size System
The system developed by HyVISION SYSTEM can support variable laser spot sizes,
ranging from 80um to 700um.
The outside of the item will be printed at precisely high quality by adjusting the laser spot smaller.
The inside of the item will be printed at high speed by adjusting the laser spot bigger.
312secs at 80um output, 68secs at 700um output
Up to 4.5 times faster output
Printing at 500x500mm in laser spot size of 80um takes approximately 312 seconds, while printing in laser spot size of 700um can finish in 68 seconds.
The laser spot size can be adjusted within a wide range (from 80um to 700um)
so that it can set off up to 4.5 times faster than printing without resizing.
Large Printing Surface
The Cubicon Max600 is one of the largest SLA printers on the market, with a maximum printing volume of 600 x 600 x 400mm, and a maximum printing weight of 70kg. Whether printing for small batch productions, or single large prints, the Max600 supports all SLA 3D printing needs.
Specification
Item |
Description |
Build Envelope Capacity |
600 × 600 × 400 mm (Full Vat) |
Maximum Build Weight |
70 kg |
Accuracy (X & Y-axis) |
±0.1 mm (Part size < 100mm) / ±0.1% × L |
Beam Size |
80μm to 700μm (Adjustable spot size) |
Scanning Speed |
6~10 m/s (SCANLAB) |
Layer Thickness |
0.05~0.2 mm |
Machine Size & Weight |
W1,064 × D1,326 × H1,904 mm & 1,200kg |
Laser |
Solid-state frequency tripled Nd:YVO4, 3W |
Wavelength |
355 nm |
Part Preparation |
Materialise Magics |
Operating System |
Windows 7, Windows 10* |
Input Data File Format |
STL, SLC |
Electrical Requirements |
200~240 VAC, 50/60 Hz, Max Current 6A |
Laser Warranty |
12 months |
Recoater Type |
Hyvision Recoater Auto Leveling & Tilt Calibration System |
Systems Control |
Closed-loop |
You might also like