Cubicon - MAX600 Industrial SLA 3D Printer

The Cubicon Max600 SLA 3D printer is the ideal industrial printer for large projects, small batch production, and full-scale prototyping with professional results. This 3D printer features an autocollimator system, adjusting the alignment between the recoater and the resin surface to within 0.01 degrees. With extensive material adaptability, the Max600 is compatible within a wide range of professional applications. 

Applications 

Planning

Compare and analyze several draft designs based on their actual sizes and materials.

Check problems of existing products based on their actual sizes and materials, and to reflect in planning.

Finalize the plan by verifying the ideal size for customers in actual size.

Design

Check the product assembly process and completeness of complex mechanisms in advance and to reflect the results in the design.

Make a final check on screws and holes in the correct position.

Test and Evaluation

Check in advance places where foreign substances reside in a pipe.

Check the actual heating value of a instead of simple calculation.

Analyze to verify any problem with oil flow depending on the temperature range.

Mold Checking

Adjust the position and number of ejector pins in consideration of the design.

Optimize the size of the stepped pulley.

Optimize the gate position for weld-free molds.

Production Preparation

Pre-test and prepare production lines before the final prototype is released.

Easily identify products with free-form surfaces.

Fabrication

Support small quantity batch production.

Support immediate fabrication only based on design without costly mold.

Replacements and Accessories after Mass Production

 Make replacement in case of a problem in part of the production equipment.

 Immediately produce and utilize any necessary accessories for efficient mass production.

Tilting Calibration Function

The proprietary Auto-Collimator measurement system (HVO-AC50L) for MAX600 has a high resolution of 0.001268 deg.

Use the system to adjust the alignment between the recoater and the resin surface to within 0.01 deg.

It also monitors tilt real time, precisely aligning the printer in the direction of gravity.

Shape less than 0.5mm

Precisely as designed

It has a high performance laser built in to accurately print the appearance of the printed output. Shapes less than 0.5mm are output correctly without any distortion.

That is, MAX600 can print even the most delicate workpieces without problems.

High-Precision Recoater Auto Leveling System

MAX600 is equipped with its unique ‘High-Precision Recoater Auto Leveling’ system based on a precision vacuum sensor and a laser displacement sensor.

By applying the method of coating the resin surface uniformly for the next layer output after one layer output, it maintains the optimum output quality through precise control of the layer thickness

With the desired material  

MAX600 supports all kinds of materials we know.

You can print the material/texture right from your head

Rigid and Solid Material

ABS Like: Good color formation in injection, the most widely used 

Tough: Extremely strong 

Polypropylene Like: Lightweight, advantageous to moldability

Tooling Board Like: High density, possible to make cutting tools 

Accurate: Very precise representation

Transparent Material

High Transparency: Excellent transparency

Polycarbonate Like: Not only transparent and light, but also resistant to impact and rupture

Flexible and Elastic Material

Rubber-like: Flexible like rubber

Soft: Excellent elasticity

Suitable Material for Special Environment

Dental: Used for dental parts

Heat-tolerant: Excellent heat-resisting property

Ceramic: High thermal and electrical conductivity

Damp-Proof: Advantageous in a high-humidity environment 

Variable Laser Spot Size System

The system developed by HyVISION SYSTEM can support variable laser spot sizes, 

ranging from 80um to 700um.

The outside of the item will be printed at precisely high quality by adjusting the laser spot smaller.

The inside of the item will be printed at high speed by adjusting the laser spot bigger.

312secs at 80um output, 68secs at 700um output

Up to 4.5 times faster output

Printing at 500x500mm in laser spot size of 80um takes approximately 312 seconds, while printing in laser spot size of 700um can finish in 68 seconds.

The laser spot size can be adjusted within a wide range (from 80um to 700um) 

so that it can set off up to 4.5 times faster than printing without resizing.

Large Printing Surface

The Cubicon Max600 is one of the largest SLA printers on the market, with a maximum printing volume of 600 x 600 x 400mm, and a maximum printing weight of 70kg. Whether printing for small batch productions, or single large prints, the Max600 supports all SLA 3D printing needs.

Specification